4. Click the
Background Printing
radio button to turn
background printing on or off.
When background printing is on, you can use your
Macintosh while it is preparing a document for printing.
You must turn on background printing to use the EPSON
Monitor2 utility to manage print jobs. For more
information, see “Using the EPSON Monitor2 Utility” on
page 4-33.
5. Close the Chooser.
Your Macintosh verifies that the printer is connected correctly.
If the message below appears, follow the instructions on the
screen, click
OK
, and repeat the steps above.
picture5
2
R
Loire-P Ref. Guide
Rev.c
A5 size Chapter 2
02-24-97 DR, pass 0
Getting Started
2-31
To Next Page
Loading...
