Using the AppleTalk connection
Follow the steps below to use an AppleTalk network
connection to send print data to the printer.
1. Turn on your printer.
2. Select the
Chooser
from the Apple menu. Click the
EPSON
Stylus(AT)
icon. Select the AppleTalk zone you want to use.
A list of all the printers connected to the selected zone
appears on the right.
Note:
If you don’t see the
EPSON Stylus(AT)
icon, use the arrows on
the right to scroll through the available icons.
picture1
L
Loire-P Ref. Guide
Rev.c
A5 size Chapter 2
02-24-97 DR, pass 0
2-32
Getting Started
To Next Page
Loading...
