3
System Requirements
To use your printer and its software with a PC, your system should have:
■
An IBM
®
compatible PC with at least a 386/25 MHz (for Windows 3.1x),
486/25 MHz (for Windows 95 or Windows NT 4.0) or 486/66 MHz (for
Windows 98) processor (Pentium
®
processor recommended)
■
Windows 3.1x, Windows 95, Windows 98, or Windows NT 4.0
■
At least 16MB of RAM (32MB for Windows 3.1x, 95, or 98, or 64MB for
Windows NT 4.0 recommended)
■
At least 50MB of free hard disk space for storing images (100MB
recommended)
■
VGA, Super VGA, or better display adapter and monitor
■
Double-speed CD-ROM drive (quad-speed or faster recommended)
■
A high-speed, bidirectional, IEEE-1284 compliant parallel cable (6 to 10 feet
long) to connect your computer to the printer; the cable must have a D-SUB,
25-pin, male connector for your computer and a 36-pin, Centronics
®
compatible connector for the printer.
Note:
If you don’t have a CD-ROM drive, you can get the printer driver
software on diskettes or download it through your modem. See
page 44 for details.
Year 2000 Ready
Your EPSON printer is Year 2000 Ready. However, be sure the other parts of your
computer system are also ready for the year 2000.
To Next Page
Loading...
Need help?
General