Transporting the Printer
Follow the steps below when moving or transporting the
printer. To protect the printer from shock and
vibration, repack it in the original box using the original
packing materials.
Note:
❏ Only hold the required area;otherwise, the printer
may be damaged.
❏ Move and transport the printer with ink cartridges
installed. Do not remove the ink cartridges;
otherwise, the nozzles may be clogged and make it
impossible to print, or ink may leak.
Preparing the Printer for
Transport
A
Turn off the printer and remove all cables.
B
Remove any paper.
C
Open the printer cover.
D
Fix the print head in place using ordinary tape.
When applying the tape, be careful not to touch
the internal parts of the printer. Some tape may
be difficult to remove if it is left in place for an
extended period. Remove the tape immediately
after transport.
E
Close the printer cover.
F
Keeping the printer flat, pack it in styrofoam or
other protective material and place it in the box.
After Transport
Before using the printer for the first time after transport,
check that the print head is not clogged.
U “Checking for clogged nozzles” on page 79
Epson Stylus Photo R2000 User's Guide
Appendix
103
To Next Page
Loading...
Need help?
General
Weight and Dimensions
