Epson Stylus Photo R2000 - Basic Operations; Loading Cut Sheets; Loading Paper into the Auto Sheet Feeder

Basic Operations
Loading Cut Sheets
The method for loading cut sheets varies with the
thickness of the paper. Three methods are available.
❏ Auto sheet feeder
❏ Rear manual feed (fine art media)
❏ Rear manual feed (thick paper)
See below for information on the paper that can be
loaded using each method.
U “Supported Media” on page 99
Note:
If the paper is wavy or curled, flatten the paper before
loading it in the printer, or use new paper. If wavy or
curled paper is loaded, this printer may not be able to
recognize the paper size, feed the paper, or print correctly.
We recommend that you return the paper to its original
package and store it flat, and take it out of the package
just before you use it.
Loading Paper into the Auto
Sheet Feeder
A
Turn on the printer.
B
Open and fully extend the paper support.
C
Open and fully extend the output tray.
Epson Stylus Photo R2000 User's Guide
Basic Operations
19