Retain Size
Create the print data larger than the paper size in
the applications to produce borderless output. The
printer driver does not enlarge the image data. Use
settings such as Page Layout in the applications to
set the size of the image data as follows.
Page settings can be set larger than the paper size by
the amounts shown below.
Sizes larger than A4 Top: +3 mm
Bottom: +4.5 mm
Left and right: +3.5
mm
A4 or smaller (excluding 100 × 148
mm, 9 × 13 cm/3.5 × 5 in., 10 × 15
cm/4 × 6 in.)
Top: +3 mm
Bottom: +4 mm
Left and right: +2.5
mm
100 × 148 mm, 9 × 13 cm/3.5 × 5 in.,
10 × 15 cm/4 × 6 in.
Top: +1.3 mm
Bottom, left, and
right: +2.5 mm
• If the application has margin settings, set the
margins to 0 mm.
• Make the image data as large as the paper size.
• There is no need to increase the top and bottom sizes
for roll paper.
Select this setting if you want to avoid image
enlargement by the printer driver.
Supported Media Sizes for
Borderless Printing
The following media sizes are supported for borderless
printing.
Supported paper sizes
A4 (210 × 297 mm)
A3 (297 × 420 mm)
A3+ (329 × 483 mm)
Letter (8½ × 11 in.)
100 × 148 mm
9 × 13 cm (3.5 × 5 in.)
10 × 15 cm (4 × 6 in.)
13 × 18 cm (5 × 7 in.)
13 × 20 cm (5 × 8 in.)
16 : 9 wide (102 × 181 mm)
20 × 25 cm (8 × 10 in.)
US B 11 × 17 in.
A3+ roll paper (329 mm wide)
Epson Stylus Photo R2000 User's Guide
Printing Varieties
49
To Next Page
Loading...
Need help?
General
Weight and Dimensions
