Epson STYLUS PRO 4910 - Mounter; Disconnecting the USB Connector; Removing the Mounter

Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 132
Confidential
3.4.1.9 Mounter
1. Open the I/F Cover, and disconnect the USB connector.
Figure 3-27. Disconnecting the USB connector
2. Remove the Mounter.
Figure 3-28. Removing the Mounter
USB connector
I/F Cover
Mounter