Epson STYLUS PRO 4910 - Paper Press Function Check

Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
ADJUSTMENT SpectroProofer Related Adjustments 405
Confidential
4.16.2.3 Paper Press Function Check
1. Install the mounter on the printer.
2. Start the Service Program.
3. Connect the USB cable to the printer.
4. Select SpectroProofer Movement Check from the inspection program.
5. Select Paper Press Function Check.
6. Click [Run].
The paper pressing plate operates and the result will be displayed.
 The result is OK: Go to Step 8
 The result is NG: Go to Step 7
7. Check the wiring of the Paper Pressing Motor. If there is no abnormality on the
wiring, replace the Paper Pressing Motor (P. 269).
Return to Step 6 to check again.
8. Click [Finish].
9. Turn the printer OFF and finish the adjustment.