Epson STYLUS PRO 4910 - Ink Selector Movement Check

Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
ADJUSTMENT Ink Supply Related Checks and Adjustments 360
Confidential
4.12.4 Ink Selector Movement Check
EXECUTION MODE
Normal Mode
PROCEDURE
1. Turn the printer ON.
2. Start the Service Program and select Ink Selector Movement Check.
3. Click [Run].
The ink selector switch operation is executed.
4. Press [OK] when
TBD is displayed.
5. Click [Finish].
6. Turn the printer OFF to complete the adjustment.
Figure 4-73. [Ink Selector Movement Check] Screen
C A U T I O N
When executing this procedure, be sure to discharge ink in advance
following the procedure in “4.12.3.1 Ink Eject (p358)”.