Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
ADJUSTMENT Ink Supply Related Checks and Adjustments 359
Confidential
4.12.3.2 Ink Charge
EXECUTION MODE
Serviceman Mode
PROCEDURE
1. Turn the printer ON in the Serviceman Mode.
Turn the power ON while pressing [Menu ] + [Paper Feed ] + [OK].
2. Start the Service Program and select Ink Eject and Initial Charge.
3. Select Ink Charge and select the item you want to execute.
4. Insert the ink cartridge to the ink holder in which ink is charged.
5. Click [Run].
Ink Charge is executed. Once the ink charge is completed, [Ready] is displayed on
the LCD of the printer.
6. Click [Finish].
7. Turn the printer OFF and finish the adjustment.
Figure 4-72. [Ink Charge] Screen
C H E C K
P O I N T
Required time per Initial Charge (all rows): 16 minutes
To Next Page
Loading...
