Epson STYLUS PRO 4910 - Default Reset

Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
ADJUSTMENT Boards Related Checks and Adjustments 391
Confidential
4.14.7 Default Reset
EXECUTION MODE
Normal Mode
PROCEDURE
1. Turn the printer ON in the Maintenance Mode.
Turn the printer ON while pressing [Pause/Cancel].
2. Select Default Panel and execute it.
The setting set with the Control Panel will be reset to the default.
3. Start the Service Program and select Default Reset.
4. Click [Run].
User job history will be reset.
5. Click [Finish].
6. Turn the printer OFF to complete the adjustment.
Figure 4-103. [Default Reset] Screen