Epson STYLUS PRO 4910 - Page 258

Epson Stylus Pro 4900/Epson Stylus Pro 4910 Revision A
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 259
Confidential
3.4.11.3 Right Cover
1. Remove the Color Measurement Device. (p255)
2. Remove the Mounter. (p132)
3. Remove the Upper Cover. (p257)
4. Remove the three screws that secure the Right Cover.
A) Silver, Phillips, Round Washer Head S-tite M3x8: two pieces
B) Silver, Phillips, Bind P-tite M3x8: one piece
5. Slide the Right Cover straight to the side to remove it.
Figure 3-199. Removing the Right Cover
C H E C K
P O I N T
In the next step, make sure to confirm which screw is attached to
which location because various screws are used here.
C A U T I O N
In the next step, make sure to slide the Right Cover straight to the
side since the guide of the Right Cover is easy to break.
Right Cover
B
A
A
Right Cover