Epson Stylus Pro 9500 - Page 12

EPSON Stylus Pro 9500 Revision A
Product Description SPECIFICATIONS 12
CUT SHEET PAPER SPECIFICATIONS
Loading of the following papers into this printer is possible, but for papers
other than the following plain paper and exclusive paper, feed through
characteristics and print quality are not guaranteed.
Paper Thickness: 420~728mm (16.54~28.66”) long
paper = 0.08~1.5mm
(0.003~0.059”)
728~1580mm (28.66~62.2”) long
paper = 0.08~0.5mm
(0.003~0.019”)
{Normal paper}
For paper meeting the following requirements, only
the feeding operation is guaranteed.
• Paper Thickness = 0.08~0.11mm (0.003~0.0043”)
• Paper Weight = 64~90gf/m
2
(17~24 lb.s)
• Paper Quality: Normal, recycled paper
*1: Load short edge first (portrait)
[Exclusive Papers]
The following genuine exclusive papers can be used.
*1: Guaranteed for Uni-D printing. The paper should be loaded longitudinally.
*2: There should be no wrinkles, fuzz, tearing or folding, of the paper, etc.
*3: This product should be used in a place with a normal room temperature environment
(Temperature: 15~25°C, Relative humidity: 40~60%).
Table 1-4. Usable Single Sheet Paper Specifications
Size
Dimensions
(W x H)
Size
Dimensions
(W x H)
Super B0 1118 x 1580mm A2 329 x 483mm
B0 1030 x 1456mm Super A3/B 297 x 483mm
B1 728 x 1030mm A3 297 x 420mm
B2 515 x 728mm ANSI E 34 x 44”
B3 364 x 515mm ANSI D 22 x 34”
Super A0 914 x 1292mm ANSI C 17 x 22”
A0 841 x 1189mm
ANSI B 11 x 17”
A1 594 x 841mm
Table 1-5. Usable Single Sheet Paper Specifications
Size
Dimensions
(W x H)
Size
Dimensions
(W x H)
Super B0 1118 x 1580mm A2 329 x 483mm
B0 1030 x 1456mm Super A3 /B 297 x 420mm
B1 728 x 1030mm A3 22 x 36”
B2 515 x 728mm ANSI E 20 x 24”
B3 364 x 515mm ANSI D 18 x 22”
Super A0 914 x 1292mm ANSI C 34 x 44”
A0 841 x 1189mm
ANSI B 22 x 34”
A1 594 x 841mm 17 x 22”
A2 420 x 594mm 11 x 17”
Table 1-6. Specifications of Genuine Exclusive Papers
Paper Name Dimensions (H x W) MC Glossy Paper *1 MC Imaging Paper
A3
297mm x 420mm
¡
-
Super A3
329mm x 483mm
¡
-