EPSON Stylus Pro 9500 Revision A
Product Description SPECIFICATIONS 13
Printable area:See the following illustration and table for details.
Note 1): The printer detects the paper width when the paper is set. (The paper width is not
detected when the paper width detection setting is Off.)
Note 2): Any image that exceeds the detected paper width, or the printable area specified by the
paper size setting, is not printed. (When paper detection setting is OFF, the printer may
print on the platen.)
Note 3): The size of the margin of roll paper can be changed from the panel as shown below.
Top and Bottom: 15 mm Left and Right: 3 mm, Top, Bottom, Left and Right: 3 mm,
Top, Bottom, Left and Right: 15 mm.
Figure 1-1. Printable Area
Table 1-7. Printable Area
Heading Roll Paper Cut Sheets
PW (width)
297 ~ 1118mm
(8.27 ~ 44.02”)
297 ~ 1118mm
(8.27 ~ 44.02”)
PL (length)
720mm ~ 45m
(8.27~1771.65”)
420~1580mm
(16.54~62.2”)
LM (left margin)
3mm/15mm*
(0.12~0.59”)
3mm
TM (top) 3mm/15mm* 3mm
RM (right) 3mm/15mm* 3mm
BM (bottom) 3mm/15mm* 14mm
PL
TM
BM
LM
PW
RM
Printable Area
Paper
Feed
To Next Page
Loading...
