EPSON Stylus Pro 9500 Revision A
Product Description SPECIFICATIONS 14
PAPER SET LEVER:
o
Lever Position = Up
The paper support is released and paper setting is possible.
o Lever Position = Down
The paper is in a fixed position and is ready to print on.
During printing, it is impossible to change the position of the paper set
lever.
During printing, an error occurs if the paper set lever is raised.
ELECTRICAL SPECIFICATIONS
CONFORMITY/SAFETY APPROVALS
Safety Standards:
US Model UL 1950, CSA 22.2 No. 950
European Model EN60950 (VDE)
EMC:
US Model FCC part 15 subpart B class B
CSA C108.8 class B
European Model EN 55022 (CISPR Pub. 22) class B
EN 61000-3-2
EN 61000-3-3
EN 50082-1
IEC 801-2
IEC 801-3
IEC 801-4
Australian Model AS/NZS 3548 class B
International Energy Star Compliant
(EPA MOU2.1 Category Large Format Printer)
Rated voltage range AC100~240V
Input voltage range AC90~264V
Rated frequency range 50 to 60Hz
Input frequency range 49 to 61Hz
Rated current
100 V System = 1.0 A
200 V System = 0.5 A
Power consumption
During operation = 100 W or less
During standby = 30 W or less
Insulation resistance
10MW or higher
(CD 500 V / Between AC line and chassis)
Dielectric strength
AC 1.0 Kvrms / 1 min. or
AC 1.2 Kvrms / 1 sec. (between AC line and chassis)
Current leakage 0.25 mA or less
To Next Page
Loading...
