Epson Stylus Pro 9500 - 2.5 Environmental Specifications

EPSON Stylus Pro 9500 Revision A
Product Description SPECIFICATIONS 15
RELIABILITY
Service Life: [Body] 20,000 Page (A0)
[Print Heads] 2 billion dots/nozzle
[Cutter] Approx. 2,000 times (Super B0)
Replacement Parts Service Life:
After printing of approx. 6200 sheets (A0), the
following parts are subject to simultaneous service
replacement.
• Waste ink pad
• Pump assembly
• Cap assembly (New part)
• Flushing box R
• Flushing box L (New part)
• Cleaner blade
ENVIRONMENTAL SPECIFICATIONS
Temperature/Humidity: See the following table.
Notes:
1) When storing the printer, make sure the printheads are in the home, capped, position.
2) Before transporting the printer, remove the ink cartridges and turn the ink valves screws to
the closed position. Also make sure the printheads are in the home, capped, position. After
transporting the printer, install new ink cartridges.
3) When the temperature drops below -15°C (5
°F), the ink in the cartridges and printheads
freezes. The ink thaws completely after three hours at 25°C (77
°F).
CHECK
PO INT
The above service replacement parts are available in
the following kit.
n Name: “Maintenance Kit Sylus Pro 9500
n Part Code: 1058462
n This maintenance kit is an exclusive kit for the
Sylus Pro 9500, and should not be used for the
Stylus Pro 9000.
Table 1-8. Temperature & Humidity
Condition Temperature Humidity Notes
Operating
15~35°C
(59~95°F)
30~80%
• Less than a month at
40°C (104°F)
Less than 120 hours at
60°C (140°F)
• Without condensation
Storage
-20~40°C
(-4~104°F)
20~85%
Transportation
-20~60°C
(-4~140°F)
5-85%