106
You see this window:
Note: Some settings may not be available, depending on the selected paper source and the Roll
Paper option you selected for your paper size.
2. Select one of the following Auto Cut settings:
• Off: Select this option to cut your prints manually.
• Normal Cut: Creates a margin at the top and bottom of your image and automatically cuts the
paper. These margins vary by media type and may be changed from their defaults using custom
media settings.
3. Select the following settings as necessary:
• Select the Auto Rotate checkbox to automatically position the image or print data to fit the roll
paper.
• Select the Print Page Line checkbox to print lines between pages as a guide for manual cutting.
To Next Page
Loading...
Need help?
General