47
Media Handling
See these sections to load and handle media on your product.
Roll Paper Handling
Cut Sheet Handling
Creating Custom Paper Configurations
Compatible Epson Papers
Paper or Media Type Settings - Printing Software
Selecting the Paper Settings for Each Source - Control Panel
Roll Paper Handling
See these sections to load, cut, and remove roll paper in your product.
Loading Roll Paper
Cutting Roll Paper
Removing Roll Paper
Parent topic: Media Handling
Loading Roll Paper
Load roll paper onto the spindle before loading the roll paper in the printer.
Note: To prevent dust from accumulating inside the printer, always keep the roll paper cover and cut
sheet cover closed unless you are loading or unloading media.
Note: This product does not support 3-inch core diameter media.
1. Remove any tape and protective paper from the end of the roll. Make sure the paper is cut straight
across to avoid paper feeding problems.
Note: Avoid touching the surface of your paper or leaving it on a dusty area.
2. Make sure Load paper is displayed on the home screen.
To Next Page
Loading...
Need help?
General