162
Note: Do not remove the protective piece shown here.
7. Select OK.
The cutter moves into position and cuts off the protective piece. Remove the protective piece from
the printer.
8. Close the cutter cover.
Parent topic: Maintenance and Transportation
Related references
Optional Equipment and Replacement Parts
Moving or Transporting Your Product
If you need to move or transport your product, prepare it as described here.
Caution: During transportation and storage, follow these guidelines:
• Avoid tilting the product, placing it vertically, or turning it upside down; otherwise ink may leak.
• Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent
the product from printing, or ink may leak.
Note: Before storing your product for a long period, replace low, expended, or expired ink to help
prevent the print head from drying out. Store your product in a cool, dry place.
1. Remove all the paper from the product.
2. Turn off the product.
3. Unplug the power cable.
4. Disconnect any connected cables.
To Next Page
Loading...
Need help?
General