125
Printer Settings Menu
Select Settings > General Settings > Printer Settings to customize paper and printing options.
Setting Options Description
Paper Source Settings Various options See the Paper Source Settings table below
Custom Paper Settings 1 to 10 See the Custom Paper Settings table below
Printing Language* USB
Network
Select the printing language to use for each
connection mode
Auto: select for most printing situations
HP-GL/2: select if HP-GL/2 or HP RTL print
data sent from a CAD application does not
automatically switch the printing mode
Universal Print Settings* Various options See the Universal Print Settings table below
HP-GL/2 Unique Settings Various options See the HP-GL/2 Unique Settings table
below
Thick Paper On
Off
Select On to widen the platen gap to prevent
scuffing if you are printing on thick paper
Bidrectional On
Off
Select On if you want the print head to move
left and right during printing
Select Off to decrease misalignment of ruled
lines, but slow down printing
PC Connection via USB Enable
Disable
Select Enable to allow access to the printer
from a USB-connected computer
USB I/F Timeout Setting 0.5 to 300 seconds Specifies the length of time before ending
communication from a USB-connected
computer
*The Printing Language and Universal Print Settings menus can be locked by an administrator. If you
cannot access or change these settings, contact your administrator for assistance.
Paper Source Settings
To Next Page
Loading...
Need help?
General