50
11. Insert the leading edge of the roll paper into the paper feeder until you hear a beep.
Note: Make sure the leading edge of the roll paper is not bent or skewed, or a paper jam or skew
error may occur.
12. Close the roll paper cover and the cut sheet cover.
Note: When you load B1 (27.8 × 39.4 inches [707 × 1000 mm]) paper in the SureColor T5170, raise
the B1 width paper support as shown or the printout may be scuffed or soiled. Lower the support
when printing on any other paper size.
13. Select the paper type you loaded on the LCD screen and set the remaining amount, if necessary.
If your printer includes a stand and paper basket, make sure the paper basket is open to catch printouts.
Parent topic: Roll Paper Handling
To Next Page
Loading...
Need help?
General