Epson TM-C3400 - Page 117

Chapter 2 Setup
117
2
Enable or disable setting of EPSON Status Monitor 3
EPSON Status Monitor 3 is disabled by default. Follow the steps below to enable EPSON Status
Monitor 3
.
1
Turn the printer on.
2
Display the printer driver window.
(See How to Use the Printer Driver on page 154 for how to display the driver window.)
3
Select [Driver Utilities] tab and click [Driver Preferences].
4
The [Driver Preferences] window is displayed.
Check the box of [Use EPSON Status Monitor 3] and click [OK].