174
•AztecCode
∗Type: Select a mode for AztecCode.
∗Number of Layers: Select the number of layers for AztecCode.
[Minimize]: Optimize the minimum number of layers automatically.
[Specify the Size]: Change the number of layers specified by the value in the
input box.
∗Cell Size: Sets the cell (module) size for AztecCode.
∗Error Correction Area: Specify the error correction area of AztecCode using of either the following.
The data can be read even if the part of the symbol is broken, and restoration
ratio becomes higher for bigger numbers.
[Default Value]: Default value is 23%+3 code words.
[Specify a Percentage]: Specify the error correction area with a percentage
value in the input box.
•DataMatrix
∗Cell Size: Makes settings of the cell (module) size for DataMatrix.
∗Number of Cells: Makes settings of the number of cells for DataMatrix.
[Minimize]: Optimize the minimum number of cells automatically.
[Specify the Size]: Change settings to the selected size.
To Next Page
Loading...
Need help?
General