Epson TM-T81 Technical & Specifications Manual

Confidential
EPSON
TITLE
SHEET
REVISION
NO
SHEETNEXT
A
App.8 App.7
TM-T81
Specification
(STANDARD)
APPENDIX E: PRINT HEAD CLEANING
Paper dust on the heating elements may lower the print quality. In this case, clean the print head as
follows:
1) Open the printer cover.
2) Clean the thermal elements of the print head using a cotton swab moistened with alcohol solvent
(ethanol, methanol, IPA).
NOTES: 1. Do not touch the print head thermal elements.
2. Do not scratch the print head.
3) Insert a roll paper and close the print head.
NOTE: The print head becomes very hot just after printing and is very dangerous. Be sure to
allow the print head to cool down (after printing) before cleaning it. Also, be sure to
turn off the printer power before cleaning the print head.
Print head
Thermal element
Radiation plate
Figure E.1 Print Head Thermal Elements
(*) Depending on the roll paper used, paper dust may stick to the platen roller and roll paper end
sensor. To remove the paper dust, clean the platen roller and roll paper end sensor with a
cotton swab moistened with water.

Epson TM-T81 Specifications

General

Print Method	Thermal line printing
Autocutter	Yes
Interface	USB, Ethernet
Dimensions	140 mm (W) x 199 mm (D) x 146 mm (H)
Power Supply	AC 100 V - 240 V, 50 Hz - 60 Hz
Paper Width	79.5 ±0.5 mm