TM-T81
Specification
(STANDARD)
<Function 6> GS ( E pL pH fn a (fn = 6)
[Name] Transmit the customized setting values
[Format] ASCII GS ( E p
L pH fn a
Hex 1D 28 45 p
L pH fn a
Decimal 29 40 69 p
L pH fn a
[Range] (p
L + pH × 256) = 2 (pL = 2 , pH = 0)
fn = 6
a = 5, 6, 97
[Description] • Transmits the customized value specified by a.
a Type of customized value
5 Print density
6 Print speed
<Function 11> GS ( E pL pH fn a d1...dk (fn = 11)
[Name] Set the configuration item for the serial interface
[Format] ASCII GS ( E p
L pH fn a d1 ... dk
Hex 1D 28 45 p
L pH fn a d1 ... dk
Decimal 29 40 69 p
L pH fn a d1 ... dk
[Range] 3 ≤ (p
L + pH × 256) ≤ 65535 (0 ≤ pL ≤ 255 , 0 ≤ pH ≤ 255)
fn = 11
a = 1
48 ≤ d ≤ 57
[Default (upon shipment)]
d1...dk = “38400”
[Description] • Sets the configuration item for the serial interface specified by a to the values
specified by d.
a Configuration item
1 Transmission speed
• Transmission speed setting (a = 1)
d1...dk Transmission speed
“2400” 2400 bps
“4800” 4800 bps
“9600” 9600 bps
“19200” 19200 bps
“38400” 38400 bps
“57600” 57600 bps
“115200” 115200 bps
[Note] • The configuration item set by this function is enabled by executing GS ( E <Function
2> or restarting the printer. Note that the host computer must be set to enable the
printer to communicate with the host computer.
To Next Page
Loading...
