TM-T81
Specification
(STANDARD)
GS ( K pL pH fn [parameters]
[Name] Select print control method(s)
[Description] • Selects the print control methods.
• pL, pH specify (pL + pH × 256) as the number of bytes after pH (fn and [parameters]).
• fn specifies the function.
• [parameters] specify the process of each function.
fn
Format Function No. Function name
50
GS ( K p
L pH fn m
50 Select the print speed.
<Function 50> GS ( K pL pH fn m (fn = 50)
[Name] Select the print speed
[Format] ASCII GS ( K p
L pH fn m
Hex 1D 28 4B p
L pH fn m
Decimal 29 40 75 p
L pH fn m
[Range] (p
L + pH × 256) = 2 (pL = 2 , pH = 0)
fn = 50
0 ≤ m ≤ 9 , 48 ≤ m ≤ 57
[Default] m = 0 (setting values of GS ( E <Function 5: a = 6>)
[Description] • Selects the print speed.
m Print speed
0, 48
Setting values of GS ( E <Function 5: a = 6>.
1, 49 Print speed level 1. slow
2, 50 Print speed level 2. |
3, 51 Print speed level 3. |
4, 52 Print speed level 4. |
5, 53 Print speed level 5. |
6, 54 Print speed level 6. |
7, 55 Print speed level 7. |
8, 56 Print speed level 8. |
9, 57 Print speed level 9. fast
To Next Page
Loading...
