Epson TM-T82II - Page 24

24
Character structure
*1: 13 × 24 font is a font with a 1-dot horizontal space added to Font A or Special font A (12 × 24) of the normal
mode. Therefore, the character size is the same as Font A or Special font A of the normal mode and the space
between characters increases by 1 dot. When printing graphics characters, there is 1-dot space between
characters.
*2: 26 × 24 font is a font w
ith a 2-dot horizontal space added to Kanji font A (24 × 24) of the normal mode.
Therefore, the character size is the same as Kanji font of the normal mode and the space between characters
increases by 2 dots.
80 mm width paper
printing
58 mm width paper
printing
Normal mode
(initial setting)
Font A 12 × 24 (including 2-dot horizontal spacing)
Font B 9 × 17 (including 2-dot horizontal spacing)
Kanji font 24 × 24
Special font A 12 × 24 (including 2-dot horizontal spacing)
Special font B 9 × 24 (including 2-dot horizontal spacing)
42 column
mode
Font A*
1
13 × 24 (including 3-dot
horizontal spacing)
9 × 17 (including 2-dot
horizontal spacing)
Font B 9 × 17 (including 2-dot
horizontal spacing)
12 × 24 (including 2-dot
horizontal spacing)
Kanji font*
2
26 × 24 (including 2-dot
horizontal spacing)
24 × 24
Special font A*
1
13 × 24 (including 3-dot
horizontal spacing)
9 × 24 (including 2-dot
horizontal spacing)
Special font B 9 × 24 (including 2-dot
horizontal spacing)
12 × 24 (including 2-dot
horizontal spacing)