50
Setting the print speed
Selectable from levels 1 to 13 (Slow ∼ Fast) (initial setting: level 13)
Setting font
•Code page: Selectable from 43 pages including user defined page
•International character set: Selectable from 18 sets
•Font A/B replacement
Optional Buzzer
When to sound the buzzer is selectable from the following occasions.
•When an error occurs
•When automatic paper cut activates
•When specified pulse 1 (2 pin) occurs
•When specified pulse 2 (5 pin) occurs
USB Class
•Printer Class
•Vendor Class
Depending on print conditions, such as print duty, print head temperature, and data
transmission speed, print speed is automatically adjusted, which may cause white lines due
to intermittent print (the motor sometimes stops). To avoid this, keep the print speed
constant by setting it lower, or set the transmission speed higher for the serial interface.
(See "Transmission Speed (DIP Switches 1-7/1-8)" on page 40.)
To Next Page
Loading...
