Epson WF-2810 Series - Moiré Patterns (Web-Like Shadows) Appear; Cannot Scan the Correct Area on the Scanner Glass; Text Is Not Recognized Correctly When Saving as a Searchable PDF

Related Information
& “Scanning Using Epson Scan 2” on page 116
Moiré Patterns (Web-Like Shadows) Appear
If the original is a printed document, moiré patterns (web-like shadows) may appear in the scanned image.
❏ On the Advanced Settings tab in Epson Scan 2, set Descreening.
❏ Change the resolution, and then scan again.
Related Information
& “Scanning Using Epson Scan 2” on page 116
Cannot Scan the Correct Area on the Scanner Glass
❏ Make sure the original is placed correctly against the alignment marks.
❏ If the edge of the scanned image is missing, move the original slightly away from the edge of the scanner glass.
❏ When scanning from the control panel and selecting the auto scan area cropping function, remove any trash or
dirt from the scanner glass and document cover. If there is any trash or dirt around the original, the scanning
range expands to include it.
Related Information
& “Placing Originals” on page 49
& “Cleaning the Scanner Glass” on page 152
Text is Not Recognized Correctly when Saving as a Searchable PDF
❏ On the Image Format Options window in Epson Scan 2, check that Text L a ngua ge is set correctly on the Tex t
tab.
❏ Check that the original is placed straight.
User's Guide
Solving Problems
190