Receiving Faxes Using only the Connected Telephone
When Remote Receive is set, you can receive faxes by simply entering the start code.
When the telephone rings, pick up the handset. When you hear a fax tone (baud), dial the two digit start code, and
then hang up the handset.
Receiving Faxes by Making a Phone Call
You can receive a fax stored on another fax machine by dialing the fax number.
Related Information
& “Receiving Faxes by Polling (Polling Receive)” on page 127
Receiving Faxes by Polling (Polling Receive)
You can receive a fax stored on another fax machine by dialing the fax number. Use this feature to receive a
document from a fax information service.
Note:
❏ If the fax information service has an audio guidance feature that you need to follow to receive a document, you cannot
use this feature.
❏ To receive a document from a fax information service that uses audio guidance, just dial the fax number using the
connected telephone, and operate the phone and the printer following the audio guidance.
1. Select Fax on the home screen.
To select an item, use the
u
d
l
r
buttons, and then press the OK button.
2. Press the OK button, and then select More.
3. Select Polling Receive, and then select On.
4. Specify the recipient.
Note:
If you cannot manually enter a fax number, Direct Dialing Restrictions in Security Settings is set to On. Select fax
recipients from the contacts list or the sent fax history.
5. Press the
x
button to start Polling Receive.
Related Information
& “Sending Faxes Dialing from the External Phone Device” on page 123
& “More” on page 129
User's Guide
Faxing
127
To Next Page
Loading...
Need help?
General
