Epson WF-2810 Series User Manual

❏ Pre-punched paper
Note:
❏ Load a single sheet of dened size plain paper with binding holes at the le or right.
❏ Adjust the print position of your le to avoid printing over the holes.
❏ Automatic 2-sided printing is not available for pre-punched paper.
4. Slide the edge guides to the edges of the paper, and then close the feeder guard.
c
Important:
Do not place objects on the feeder guard. Doing so may prevent paper from feeding.
5.
On the control panel, set the size and type of the paper you loaded in the rear paper feed.
To select an item, use the
u d l r buttons, and then press the OK button.
Note:
❏ You can also display the paper size and paper type settings screen by selecting Settings > Printer Setup > Paper
Source Settings > Paper Setting.
❏ For letterhead paper, select Letterhead as the paper type.
❏ For letterhead paper, if you print on paper that is smaller than the setting in the printer driver, the printer may print
beyond the edges of the paper which can lead to ink smears on your printouts and excess ink building up inside the
printer. Make sure you select the correct paper size setting.
❏ 2-sided printing and borderless printing are not available for letterhead paper. Also, the print speed may be slower.
User's Guide
Preparing the Printer
47

Epson WF-2810 Series Specifications

General

Print Technology	Inkjet
Max Print Resolution	5760 x 1440 dpi
Print Speed (Black)	10 ppm
Print Speed (Color)	5 ppm
Paper Capacity	100 sheets
Scanner Type	Flatbed
Scan Resolution	1200 x 2400 dpi
Fax Speed	33.6 kbps
Functions	Print, Scan, Copy, Fax
Weight	4.3 kg
Connectivity	USB, Wi-Fi
Paper Sizes Supported	Letter, Legal, A4, A5, B5
Mobile Printing	Apple AirPrint, Google Cloud Print
Ink Cartridges	4 individual (Black, Cyan, Magenta, Yellow)
Dimensions	375 x 300 x 170 mm
Duplex Printing	Yes (Manual)