• Press to delete the previous character.
• Press to enter numbers and symbols.
• Press to enter a space.
• Press to change the keyboard layout.
8. When you finish entering your password, press and select Proceed.
You see a screen like this:
9. Scroll down to view the Wi-Fi network name (SSID) and password.
10. Use your computer or wireless device to select the SSID displayed on the LCD screen, then enter
the password shown.
11. Press the home button to exit.
You see either an AP or Direct connection symbol on the LCD screen and should be able to print
directly to your product from your computer or device.
Note: If the AP or Direct connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode
is not enabled. Repeat these steps to try again.
Parent topic: Wi-Fi Direct Mode Setup
Related tasks
Entering Characters on the LCD Screen
53
To Next Page
Loading...
