Epson WF-C5710 User Manual

210
Note: If you are using your Epson product with the Windows 10 S operating system, you cannot use the
software described in this section. You also cannot download and install any Epson product software
from the Epson website for use with Windows 10 S; you must obtain software only from the Windows
Store.
Note: Your device must be connected to the same wireless network as your Epson product. If you have
an NFC-enabled device, you can also scan with the Epson iPrint app by placing the device against the
NFC tag on the front of the product.
1. Download the Epson iPrint app from your device's app store or from Epson's website.
2. Place your original on the product for scanning.
3. Open the Epson iPrint app and select your product.
4. Select the scan settings and scan your original.
5. Save your scanned image to a file or cloud location.
Parent topic: Starting a Scan
Related tasks
Using the Epson iPrint Mobile App
Using Epson Remote Print
Using Epson Email Print
Using Epson Scan to Cloud
Entering a User ID and Password for Scanning
If you enabled Access Control on your product, a user ID and password may be required to scan. You
can enter the user ID and password in Epson Scan 2.
Note: If you do not know the user ID or password, contact your administrator for assistance.
1. Start Epson Scan 2.
2. Select Settings from the Scanner drop-down list.

Epson WF-C5710 Specifications

General

Print Resolution	4800 x 1200 dpi
Duplex Printing	Yes
Scan Resolution	1200 x 2400 dpi
Fax Capability	Yes
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct, NFC
Display	4.3" color touchscreen
Functions	Print, Copy, Scan, Fax
Automatic Document Feeder (ADF)	Yes
ADF Capacity	50 sheets
Print Technology	PrecisionCore
Paper Capacity	330 sheets
Scanner Type	Flatbed
Fax Speed	33.6 Kbps
Paper Handling Input	250 sheets
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Paper Sizes	A4, A5, A6, B5
Ink Cartridges	4 individual ink cartridges (Black, Cyan, Magenta, Yellow)
Ink Type	DURABrite Ultra pigment ink