Epson WF-C5710

26
Parent topic: Setting a Password and Locking the Control Panel
Related tasks
Entering Characters on the LCD Screen
Setting User Feature Restrictions (Access Control)
Using Web Config Access Control settings, you can restrict access to product features for individual
users to prevent misuse of the product. Restricted features require the user to enter an ID and password
on the product control panel.
After you set up feature restrictions, you must enable them using the product control panel.
Note: For more information on administration settings, see the Administrator's Guide.
1. Press the home button, if necessary.
2. Select Settings > General Settings > System Administration > Security Settings > Access
Control.
You see a screen like this:
3. Select the Access Control field to turn the setting on.
4. If you want to allow users to print from generic drivers or use WSD scanning, select the Accept
Unknown User Jobs field to turn the setting on.
5. Press the home button to exit.
Parent topic: Using the Control Panel