Epson WF-C5710

338
Code Condition/solution
423 A communication error has occurred.
Check the network connection, or make sure the settings are correct for the folder
selected in Settings > General Settings > Fax Settings > Receive Settings >
Save/Forward Settings. If the problem cannot be cleared, contact your product
administrator.
425 There is not enough storage space available in the forwarding destination folder. Increase
the storage space in the destination folder.
428 The destination was wrong or the destination does not exist. Make sure the settings are
correct for the folder selected in Settings > General Settings > Fax Settings > Receive
Settings > Save/Forward Settings.
Parent topic: Solving Problems
Related concepts
Scan Resolution Guidelines
Related tasks
Connecting a Telephone or Answering Machine
Printing a Network Status Sheet
Related topics
Wi-Fi or Wired Networking
Sending Faxes
Running a Product Check
Running a product check helps you determine if your product is operating properly.
1. Disconnect any interface cables connected to your product.
2. Load plain paper in the paper cassette.
3. Press the home button, if necessary.
4. Select Settings.
5. Select Maintenance.