313
6. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
7. Do one of the following:
• If there are no gaps, select O.
• If there are gaps or the pattern is faint, select X and continue.
8. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the
process as necessary.
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
If you don’t see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without
printing. Then try cleaning the print head again. If quality still does not improve, contact Epson.
Parent topic: Print Head Nozzle Check
Related concepts
Print Head Cleaning
Related tasks
Removing and Installing Ink Packs
Loading Paper in the Cassette
Checking the Nozzles Using a Computer Utility
To Next Page
Loading...
