Epson WF-C5790 Series - Scanning to a Computer (WSD)

Scanning to a Computer (WSD)
Note:
❏  i s f e atu re i s o nly ava il abl e f o r c om put er s r un n ing Win do ws 10 /Wi nd ow s 8 .1 / Wind ow s 8 / Wi nd ow s 7 /Wi nd ow s Vi st a .
❏ If you are using Windows 7/Windows Vista, you need to setup your computer in advance using this feature.
1. Place the originals.
Note:
If you want to scan multiple originals, place all of the originals on the ADF.
2.
Select Scan on the home screen.
3. Select Computer (WSD).
4. Select a computer.
5. Tap
x .
Setting Up a WSD Port
is section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
e
following is necessary to set up a WSD port.
❏ e printer and the computer are connected to the network.
❏ e printer driver is installed on the computer.
1. Turn the printer on.
2. Click start, and then click Network on the computer.
3. Right-click the printer, and then click Install.
Click Continue when the User Account Control screen is displayed.
User's Guide
Scanning
126