4. Slide the ADF edge guide to the edge of the originals.
Related Information
& “Available Originals for the ADF” on page 36
Placing Originals on the ADF for 2-up Copying
Place the originals in the direction shown in the illustration, and then select the orientation setting.
❏ Landscape originals: Select Up Direction on the control panel as described below.
Copy > Advanced > Orientation (Original) > Up Direction
Place the originals on the ADF in the direction of the arrow.
❏ Portrait originals: Select Le Direction on the control panel as described below.
Copy > Advanced > Orientation (Original) >
Le
Direction
Place the originals on the ADF in the direction of the arrow.
Placing Originals on the Scanner Glass
!
Caution:
Be careful not to trap your hand or
ngers
when opening or closing the document cover. Otherwise you may be
injured.
User's Guide
Preparing the Printer
39