Epson WF-C5790 Series - Saving and Forwarding Incoming Faxes

3. When you hear a fax tone, select Send/Receive at the upper right corner of the LCD screen, and then select
Receive.
Note:
When receiving a fax from a fax polling service, and you hear the audio guidance, follow the guidance to make the
printer operations.
4. Tap x .
Receiving Faxes from a Board with a Subaddress (SEP) and Password (PWD)
(Polling Receive)
By dialing to a sender, you can receive faxes from a board stored on sender's fax machine with a subaddress (SEP)
and password (PWD) feature. To use this feature, register the contact with the subaddress (SEP) and password
(PWD) in the contacts list in advance.
1. Select Fax on the home screen.
2. Select
(More).
3. Select Extended Fax.
4.
Tap Polling Receive to set this to On.
5. Tap Close, and then tap Close again.
6. Select Contacts, and then select the contact with the registered subaddress (SEP) and password (PWD) to
match the destination board.
7. Tap
x .
Related Information
&
“Managing Contacts” on page 46
& “Sending Faxes Dialing from the External Phone Device” on page 137
& “Receiving Faxes Aer Conrming the Sender's Status” on page 149
& “More” on page 146
Saving and Forwarding Incoming Faxes
Summary of the Features
Saving Received Faxes in the Printer
e received faxes can be saved in the printer, and you can view them on the printer's screen. You can print only
the faxes you want to print or delete unnecessary faxes.
User's Guide
Faxing
150