EasyManuals Logo

Epson WF-C5790 Series User Manual

Epson WF-C5790 Series
266 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
When printing in monochrome or grayscale, color inks instead of black ink may be used depending on the
paper type or print quality settings.
is
is because a mixture of color inks is used to create black.
e ink in the ink supply units supplied with your printer is partly used during initial setup. In order to produce
high quality printouts, the print head in your printer will be fully charged with ink.
is
one-o
process
consumes a quantity of ink and therefore these ink supply units may print fewer pages compared to subsequent
ink supply units.
For best results, use up ink supply unit within two years of installation.
Replacing Ink Supply Units
When a message is displayed prompting you to replace the ink supply units, select How To and then view the
animations displayed on the control panel to learn how to replace the ink supply units.
Related Information
& “Ink Supply Unit Handling Precautions” on page 167
Maintenance Box Code
Epson recommends the use of a genuine Epson maintenance box.
e following is the code for the genuine Epson maintenance box.
T6716
Maintenance Box Handling Precautions
Read the following instructions and Important Safety Instructions (paper manual) before replacing the
maintenance box.
Do not touch the green chip on the side of the maintenance box. Doing so may prevent normal operation and
printing.
Do not tilt the used maintenance box until aer it is sealed in the plastic bag; otherwise ink may leak.
Keep the maintenance box out of direct sunlight.
Do not replace the maintenance box during printing; otherwise, ink may leak.
Do not reuse a maintenance box which has been removed and le detached for a long period. Ink inside the box
will have solidied and no more ink can be absorbed.
Replacing a Maintenance Box
In some print cycles a very small amount of surplus ink may be collected in the maintenance box. To prevent ink
leakage from the maintenance box, the printer is designed to stop printing when the absorbing capacity of the
maintenance box has reached its limit. Whether and how
oen
this is required will vary according to the number
of pages you print, the type of material that you print and the number of cleaning cycles that the printer performs.
User's Guide
Replacing Ink Supply Units and Other Consumables
169

Table of Contents

Other manuals for Epson WF-C5790 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson WF-C5790 Series and is the answer not in the manual?

Epson WF-C5790 Series Specifications

General IconGeneral
Print Resolution4800 x 1200 dpi
Automatic Duplex PrintingYes
Scan Resolution1200 x 2400 dpi
ADF Capacity50 sheets
Monthly Duty CycleUp to 45, 000 pages
Display4.3" color touchscreen
Maximum Paper Size8.5" x 47.2"
FaxYes
Product TypeMultifunction Printer
Output Capacity150 sheets
Print TechnologyPrecisionCore
Paper Capacity250 sheets
ConnectivityUSB, Ethernet, Wi-Fi, Wi-Fi Direct
Scanner TypeFlatbed, ADF
Mobile PrintingEpson Connect, Apple AirPrint, Google Cloud Print
Standard Paper Input250 sheets
Paper SizesA4, A5, A6, B5, Letter, Legal, Executive
Ink TypeEpson DURABrite Ultra pigment ink
Ink Cartridge Configuration4 individual ink cartridges (Black, Cyan, Magenta, Yellow)
Operating Systems SupportedWindows, macOS
Print Speed24 ISO ppm (black/color)

Related product manuals