Too many originals are loaded in the ADF.
Solutions
Do not load originals above the line indicated by the triangle symbol on the ADF.
The original slips when paper dust adheres to the roller.
Solutions
Clean the inside of the ADF.
& “Cleaning the ADF” on page 172
Originals are not detected.
Solutions
On the screen for copy or scan, or fax, check that the ADF icon is on. If it is o, place the originals again.
Paper is Not Stacked in Order
The lever on the right side of the output tray has not been pulled.
Solutions
If you pull the lever on the right side of the output tray, the problem may be improved, but the holding
capacity will be reduced.
Solving Problems
>
The Printer Does Not Work as Expected
>
Paper Does Not Feed or Eject Correctly
202
To Next Page
Loading...
Need help?
General