Wiring Codes with Clamps
Wire codes using clamps as shown below.
Printer Stand
c
Important:
When installing the printer on the
oor,
install the printer stand.
e
printer may fall without the printer stand.
❏ When carrying the printer, be sure to
li
it in a stable position.
Liing
the printer while it is unstable may result
in injury.
❏ Because this printer is heavy, it should always be carried by four or more people when unpacking and
transporting.
❏ Because this printer stand is heavy, it should always be carried by two or more people when unpacking and
transporting.
Installing the Printer Stand
e
printer stand can be attached to the printer and the paper cassette units.
Using Optional Items
>
Printer Stand
>
Installing the Printer Stand
316
To Next Page
Loading...
