Epson WF-C878RDWF - Page 317

!
Caution:
❏ Make sure you turn o the printer, unplug the power cord from the printer, and disconnect any cables before
starting installation. Otherwise, the power cord may be damaged resulting in re or electric shock.
❏ Lock the casters of the printer stand before starting installation. If the printer stand moves unexpectedly, you may
be injured.
❏ When liing the printer, place your hands in the positions shown below. If you li the printer holding other
positions, the printer may fall or you may trap your ngers when placing the printer.
1.
Turn o the printer by pressing the
P button, and then unplug the power cord.
2.
Disconnect any connected cables.
Note:
if the paper cassette unit has been installed, uninstall it as well.
3.
Remove the output tray.
4.
Remove the printer stand from the box, and then remove any protective materials.
Using Optional Items > Printer Stand > Installing the Printer Stand
317