1.
Place all originals face up in the ADF.
c
Important:
If you want to copy originals that are not supported by the ADF, use the scanner glass.
“Originals that are not Supported by the ADF” on page 43
Note:
You can also place the originals on the scanner glass.
“Placing Originals” on page 41
2.
Select Copy on the home screen.
3.
Select the Basic Settings tab, select 2-Sided, and then select 2→2-Sided or 1→2-Sided
4.
Specify other settings such as the original orientation and the binding position.
5.
Tap
x
.
Copying by Enlarging or Reducing
You can copy originals at a specied magnication.
1.
Place the originals.
“Placing Originals” on page 41
2.
Select Copy on the home screen.
3.
Select the Basic Settings tab, and then select Reduce/Enlarge.
4.
Specify the amount of enlargement or reduction.
5.
Tap
x
.
Copying
>
Available Copying Methods
>
Copying by Enlarging or Reducing
99
To Next Page
Loading...
Need help?
General