17.
Connect the cables and plug in the printer.
Note:
When uninstalling the printer stand, turn o the printer, unplug the power cord, disconnect any cables, and then
perform the installation procedure in reverse.
Related Information
& “List of Optional Items” on page 315
& “Wiring Codes with Clamps” on page 316
Moving the Printer While the Printer Stand is Attached
Before moving the printer, uninstall the printer stand. Complete the steps for moving the printer, and then perform
the steps in the following images.
Using Optional Items
>
Printer Stand
>
Moving the Printer While the Printer Stand is Attached
322
To Next Page
Loading...
