Epson WF-C878RDWF User Manual

Code Problem Solution
325
326
There is not enough storage space available in the
specied
folder.
❏ Increase the storage space in the specied folder.
❏ Reduce the number of documents.
❏ Lower the scanning resolution or increase the
compression ratio to reduce the size of the
scanned image.
327 The memory is full. Wait until other ongoing jobs are nished.
328 The destination was wrong or the destination does
not exist.
Check the Location settings.
330 An FTPS/FTPS secure connection error has occurred. ❏ Check the location in the destination settings.
❏ Run Web Cong, and then update the root
certicate.
❏ Run Web Cong, and then import or update the
CA certicate.
If the error cannot be cleared, set the
certicate
verication
to
o
in the destination settings.
331 A communication error occurred while acquiring the
destination list.
Print a network connection report to check if the
printer is connected to the network.
332 There is not enough storage space available to save
the scanned image in the destination storage.
Reduce the number of documents.
333 The destination could not be found because the
destination information was uploaded to the server
before sending the scanned image.
Select the destination again.
334 An error occurred while sending the scanned image. -
341 A communication error has occurred. ❏ Check the connections for the printer and the
computer. If you are connecting over a network,
print a network connection report to check if the
printer is connected to the network.
❏ Make sure that Document Capture Pro is installed
on the computer.
350 An FTPS/HTTPS certicate error has occurred. ❏ Make sure that the date/time and time dierence
settings are correct.
❏ Run Web Cong, and then update the root
certicate.
❏ Run Web Cong, and then import or update the
CA certicate.
If the error cannot be cleared, set the
certicate
verication to o in the destination settings.
401 There is not enough storage space available to save
the data in the memory device.
Increase the storage space in the memory device.
402 The memory device is write-protected. Disable write protection on the memory device.
404 The memory device has been removed. Reinsert the memory device.
Solving Problems > The Printer Does Not Work as Expected > Error Code is Displayed on the Status Menu
254

Epson WF-C878RDWF Specifications

General

Brand	Epson
Model	WF-C878RDWF
Category	Printer
Language	English