Epson WF-C878RDWF - Page 450

6.
Select the export format from Export > Export items.
❏ All Items
Export the encrypted binary le. Select when you want to include the security items such as password and
personal information. You cannot edit the le. If you select it, you have to set the password. Click
Conguration
and set a password between 8 and 63 characters long in ASCII.
is
password is required
when importing the binary le.
❏ Items except Security Information
Export the SYLK format or csv format
les.
Select when you want to edit the information of the exported
le.
7.
Click Export.
8.
Specify the place to save the le, select the le type, and then click Save.
e completion message is displayed.
9.
Click OK.
Check that the le is saved to the specied place.
Importing Contacts
Import the contacts information from the le.
You ca n i mp ort the
les
saved in SYLK format or csv format or the backed-up binary
le
that includes the security
items.
1.
Start Epson Device Admin.
2.
Select Devices on the side bar task menu.
3.
Select the device you want to congure from the device list.
4.
Click Device Conguration on the Home tab on the ribbon menu.
When the administrator password has been set, enter the password and click OK.
5.
Click Common > Contacts.
6.
Click Browse on Import.
7.
Select the le you want to import and then click Open.
When you select the binary
le,
in Password enter the password you set when exporting the
le.
8.
Click Import.
e conrmation screen is displayed.
9.
Click OK.
e validation result is displayed.
❏ Edit the information read
Click when you want to edit the information individually.
Administrator Information > Settings to Use the Printer > Making Contacts Available
450