Epson WF-C878RDWF User Manual

Cannot Create the Secure IPP Printing Port
The correct certicate is not specied as the server certicate for SSL/TLS communication.
If the specied certicate is not correct, creating a port may fail. Make sure you are using the correct certicate.
The CA certicate is not imported to the computer accessing the printer.
If a CA certicate is not imported to the computer, creating a port may fail. Make sure a CA certicate is imported.
Related Information
& “Conguring a Server Certicate for the Printer” on page 505
Cannot Connect After Conguring IPsec/IP Filtering
The settings of IPsec/IP Filtering are incorrect.
Disable IPsec/IP ltering from the printer’s control panel. Connect the printer and computer and make the
IPsec/IP Filtering settings again.
Related Information
& “Encrypted Communication Using IPsec/IP Filtering” on page 505
Cannot Access the Printer or Scanner after
Conguring
IEEE802.1X
The settings of IEEE802.1X are incorrect.
Disable IEEE802.1X and Wi-Fi from the printer’s control panel. Connect the printer and a computer, and then
congure
IEEE802.1X again.
Related Information
& “Conguring an IEEE802.1X Network” on page 517
Problems on Using a Digital
Certicate
Cannot Import a CA-signed Certicate
CA-signed Certicate and the information on the CSR do not match.
If the CA-signed Certicate and CSR do not have the same information, the CSR cannot be imported. Check the
following:
❏ Are you trying to import the
certicate
to a device that does not have the same information?
Check the information of the CSR and then import the
certicate
to a device that has the same information.
❏ Did you overwrite the CSR saved into the printer aer sending the CSR to a certicate authority?
Obtain the CA-signed certicate again with the CSR.
Administrator Information > Advanced Security Settings > Solving Problems for Advanced Security
522

Epson WF-C878RDWF Specifications

General

Brand	Epson
Model	WF-C878RDWF
Category	Printer
Language	English