WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100 Revision C
Maintenance Overview 161
Confidential
5. Hold the Carriage Unit, and while turning the Carriage Shaft, move the Carriage
Unit to the left end of the Carriage Shaft to lubricate the grease evenly.
6. Lubricate grease with the syringe at the point shown in refer to Figure 6-22.
Figure 6-22. Lubricating the Carriage Shaft (4)
7. Hold the Carriage Unit, and while turning the Carriage Shaft, move the Carriage
Unit to the right end of the Carriage Shaft to lubricate the grease evenly.
Figure 6-23. Lubricating the Carriage Shaft (5)
8. Repeat step 4 ~ 7.
Lubrication Type Lubrication Amount
G-71 140mg ± 10mg
To Next Page
Loading...
