WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100 Revision C
Product Description Operation Buttons & Indicators (LEDs) 19
Confidential
1.5.3 Operation Buttons & LEDs Functions
Detailed information on the buttons and LEDs functions are listed below.
Note * : The nozzle check pattern printed by the printer is shown in Figure 1-5.
Figure 1-5. Nozzle Check Pattern
Table 1-13. Operation Button Functions
Button
Printer
Status
Function
Power
Off • Turns the power on.
On • Turns the power off.
Paper On
• Feeds or ejects paper.
• Recovers from a multi-feed error and feeds paper to
restart the print job.
• Feeds paper when paper is loaded after a no-paper
error occurs.
• Ejects a jammed paper when a paper jam error occurs.
• Runs a sequence of ink cartridge replacement when
an ink-out error occurs. The carriage moves to set the
ink cartridge to the position for replacement.
• When the carriage has been set in the ink replacement
position, moves the carriage to the home position.
Ink On
• Runs a sequence of ink cartridge replacement. The
carriage moves to set the ink cartridge to the position
for replacement.
• When an ink cartridge has been set in the ink replacement
position, moves the carriage to the home position.
Ink
(when held for three
seconds or longer)
On
• Runs a head cleaning.
• Runs a sequence of ink cartridge replacement when
ink level low, ink out, or no ink cartridge error has
occurred.
Cancel On
• Cancels the print job during printing.
• When the carriage has been set in the ink replacement
position, moves the carriage to the home position.
Power + Ink
(combination)
On
• Forcefully turns the power off.
Power + Paper
(combination)
At power on
• Prints a nozzle check pattern*
when not connected to
the PC.